SERVICES

One system. No salt, no electricity, no compromise.

Austin water needs more than a single filter cartridge — but it doesn't need a traditional salt-based softener or a wasteful reverse osmosis setup either. PureWay's 3-stage inline system handles scale, chloramine, and a wide range of contaminants in one whole-home install.

Water contact isn't limited to drinking. Hot showers open pores and vaporize chlorine and chloramine into steam, so a whole-home system treats what a sink filter never reaches. See why that matters.

The PureWay 3-stage whole-home water filter, showing PureShield, NanoArmor, and ChemGuard filter cartridges mounted together, labeled 'Every Tap Purified'

EVERY TAP PURIFIED

The 3-stage system, in your utility closet

Every whole-home install is built around PureWay's 3-stage inline filter, mounted at your main water line so every tap in the house runs through it — not just the kitchen sink. No electricity, no salt, no chemicals added, no wastewater, and no service contracts required.

STAGE 1 · PURESHIELD

Anti-Scale Pre-Filtration

A pleated, high-capacity pre-filter with an electropositive nano-alumina charge that captures particles most mechanical filters miss, plus an anti-scale core that keeps calcium and magnesium dissolved instead of crystallizing into scale on your pipes and water heater.

STAGE 2 · NANOARMOR

Microbiological Protection

Infused with Agion silver and built on the same electropositive nanotechnology used in medical and dental water systems, capturing contaminants down to 0.2 microns — including bacteria and viruses — at a nine-log (99.9999999%) capture and kill rate.

STAGE 3 · CHEMGUARD

Catalytic Carbon Polish

A high-density, coconut-shell catalytic carbon block engineered specifically to break down chloramine — which standard carbon can't fully remove — along with PFAS, VOCs, and pesticides, for a final clean, great-tasting result.

COMMON FILTER OPTIONS

What most alternatives miss

Before recommending anything, it's worth being straight about what the common alternatives actually do — and don't do.

FRIDGE / PITCHER FILTERS

Limited protection, one faucet

Refrigerator and pitcher filters (like Brita) only treat a small fraction of household water use, can be prone to mold growth if not changed on schedule, and typically don't remove bacteria, viruses, fungi, or cysts.

TRADITIONAL SOFTENERS

Not actually a filter

Ion-exchange softeners remove calcium and magnesium — minerals your body needs — using sodium, and they don't remove chemicals, bacteria, fungi, or cysts. They also carry ongoing salt and service costs.

REVERSE OSMOSIS (UNDER-SINK OR WHOLE-HOME)

Wasteful and high-maintenance

RO systems can waste 3–20 times more water than they produce, strip out healthy minerals along with contaminants, and require regular professional maintenance. Whole-house RO systems add electricity dependence and a large footprint, often at a cost of $15,000–$30,000 or more.

PureWay's 3-stage system is different: no electricity, no salt, no added chemicals, no wastewater, and no service contracts — while still protecting against scale, chloramine, and a wide range of biological and chemical contaminants.

THE PUREWAY 99.99% CLUB

Tested, trusted, transparent

PureWay systems are backed by in-house testing and independent third-party validation against a wide range of contaminants — not just hardness. Membership in the 99.99% Club means your system has been verified to reduce all of the following by 99.99%:

99.99%PFAS, PFOA, PFOS

99.99%Lead

99.99%Chlorine

99.99%Chloramine

99.99%Chloroform

99.99%THMs

99.99%Haa5 & Haa9

99.99%VOCs

99.99%Arsenic

99.99%Heavy Metals

99.99%Mercury

99.99%Chromium

99.99%Pesticides

99.99%Bacteria

99.99%Cysts

99.99%Virus

PureWay systems meet and exceed NSF/ANSI Standards 42, 53, and 61.

PureWay 99.99% Club infographic listing contaminants reduced by 99.99%, including THMs, arsenic, lead, chlorine, chloramine, PFAS/PFOA/PFOS, and more, certified to NSF/ANSI Standards 42, 53, and 61

CERTIFIED COMPONENTS

What each stage is built to reduce

PureWay systems are designed to improve the quality of potable municipal water across four categories of contaminants:

CHEMICAL

Disinfection byproducts & more

Disinfecting byproducts, pharmaceuticals, vinyl chloride, chlorine, chloramine, pesticides, PFAS, VOCs.

METALS

Heavy metals

Iron, lead, chromium, arsenic, mercury, nickel, copper, zinc.

MICROBIOLOGICAL

Bacteria, viruses & more

Bacteria, viruses, parasites, cysts, and odor-causing organisms.

SEDIMENT

Particulate & buildup

Biofilm fragments, oxidized iron, fine particles, microplastics, sediment, sand, rust, silt.

Actual performance varies with water chemistry, flow rate, and usage. Filters should be replaced according to schedule to maintain performance. For full performance data, see purewayfiltration.com/performance.

View IAPMO R&T certification documents (NSF/ANSI 42, 53 & 61) →

A NOTE ON WATER TESTING

Don't fall for the TDS scare test

Some door-to-door water treatment pitches use a "TDS precipitator" device to make your water look contaminated. Here's what it actually does.

What the device shows you

Runs an electric current through a water sample, which reacts with naturally occurring minerals to create harmless brown sludge
Is presented as proof your water is "dirty" or dangerous
Tests softened or reverse-osmosis water side by side, which looks "cleaner" only because it has no minerals left in it to react

What's actually true

Total Dissolved Solids (TDS) is a measure of minerals like calcium and magnesium, not dirt or danger
The World Health Organization and U.S. EPA both state TDS is not a health risk at typical levels
The FDA requires bottled mineral water to contain at least 250 mg/L of TDS — the same minerals this test is used to scare people about

We'd rather explain what a real water test shows than use a scare tactic to make a sale.

SYSTEM SPECIFICATIONS

Whole-home unit (large size)

Every Tap Purified SPECS

System size25"H x 24"W x 8"D

Connection size1"

Max flow rate20 GPM

Optimal flow rate14 GPM

Operating pressure125 PSI

pH range6.5–9.5

Operating water temp36–120°F

Specifications apply to the large whole-home unit. Your recommended configuration depends on your household size and on-site test result.

WARRANTY

Peace of mind comes standard

From day one, your system is covered: housings carry a limited lifetime warranty, installation materials are covered for one year, and cartridges include a one-year pro-rated warranty. See official warranty terms for full details and coverage limitations.

1-year warranty on installation materials
Limited lifetime warranty on housing
1-year pro-rated cartridge warranty